The Redis ACL, short for Access Control List, is the feature that allows certain connections to be limited in terms of the commands that can be executed and the keys that can be accessed. The way it works is that, after connecting, a client is required to provide a username and a valid password to authenticate. If authentication succeeded, the connection is associated with a given user and the limits the user has. Redis can be configured so that new connections are already authenticated with a "default" user (this is the default configuration). Configuring the default user has, as a side effect, the ability to provide only a specific subset of functionalities to connections that are not explicitly authenticated.
In the default configuration, Redis 6 (the first version to have ACLs) works exactly like older versions of Redis. Every new connection is capable of calling every possible command and accessing every key, so the ACL feature is backward compatible with old clients and applications. Also the old way to configure a password, using the requirepass configuration directive, still works as expected. However, it now sets a password for the default user.
AUTH command was extended in Redis 6, so now it is possible to
use it in the two-arguments form:
AUTH <username> <password>
Here's an example of the old form:
What happens is that the username used to authenticate is "default", so just specifying the password implies that we want to authenticate against the default user. This provides backward compatibility.
Before using ACLs, you may want to ask yourself what's the goal you want to accomplish by implementing this layer of protection. Normally there are two main goals that are well served by ACLs:
Another typical usage of ACLs is related to managed Redis instances. Redis is often provided as a managed service both by internal company teams that handle the Redis infrastructure for the other internal customers they have, or is provided in a software-as-a-service setup by cloud providers. In both setups, we want to be sure that configuration commands are excluded for the customers.
ACLs are defined using a DSL (domain specific language) that describes what a given user is allowed to do. Such rules are always implemented from the first to the last, left-to-right, because sometimes the order of the rules is important to understand what the user is really able to do.
By default there is a single user defined, called default. We
can use the
ACL LIST command in order to check the currently active ACLs
and verify what the configuration of a freshly started, defaults-configured
Redis instance is:
> ACL LIST 1) "user default on nopass ~* &* +@all"
The command above reports the list of users in the same format that is used in the Redis configuration files, by translating the current ACLs set for the users back into their description.
The first two words in each line are "user" followed by the username. The
next words are ACL rules that describe different things. We'll show how the rules work in detail, but for now it is enough to say that the default
user is configured to be active (on), to require no password (nopass), to
access every possible key (
~*) and Pub/Sub channel (
&*), and be able to
call every possible command (
Also, in the special case of the default user, having the nopass rule means
that new connections are automatically authenticated with the default user
without any explicit
AUTH call needed.
The following is the list of valid ACL rules. Certain rules are just single words that are used in order to activate or remove a flag, or to perform a given change to the user ACL. Other rules are char prefixes that are concatenated with command or category names, key patterns, and so forth.
Enable and disallow users:
on: Enable the user: it is possible to authenticate as this user.
off: Disallow the user: it's no longer possible to authenticate with this user; however, previously authenticated connections will still work. Note that if the default user is flagged as off, new connections will start as not authenticated and will require the user to send
HELLOwith the AUTH option in order to authenticate in some way, regardless of the default user configuration.
Allow and disallow commands:
+<command>: Add the command to the list of commands the user can call. Can be used with
|for allowing subcommands (e.g "+config|get").
-<command>: Remove the command to the list of commands the user can call. Starting Redis 7.0, it can be used with
|for blocking subcommands (e.g "-config|set").
+@<category>: Add all the commands in such category to be called by the user, with valid categories being like @admin, @set, @sortedset, ... and so forth, see the full list by calling the
ACL CATcommand. The special category @all means all the commands, both the ones currently present in the server, and the ones that will be loaded in the future via modules.
+@<category>but removes the commands from the list of commands the client can call.
+<command>|first-arg: Allow a specific first argument of an otherwise disabled command. It is only supported on commands with no sub-commands, and is not allowed as negative form like -SELECT|1, only additive starting with "+". This feature is deprecated and may be removed in the future.
allcommands: Alias for +@all. Note that it implies the ability to execute all the future commands loaded via the modules system.
nocommands: Alias for -@all.
Allow and disallow certain keys and key permissions:
~<pattern>: Add a pattern of keys that can be mentioned as part of commands. For instance
~*allows all the keys. The pattern is a glob-style pattern like the one of
KEYS. It is possible to specify multiple patterns.
%R~<pattern>: (Available in Redis 7.0 and later) Add the specified read key pattern. This behaves similar to the regular key pattern but only grants permission to read from keys that match the given pattern. See key permissions for more information.
%W~<pattern>: (Available in Redis 7.0 and later) Add the specified write key pattern. This behaves similar to the regular key pattern but only grants permission to write to keys that match the given pattern. See key permissions for more information.
%RW~<pattern>: (Available in Redis 7.0 and later) Alias for
allkeys: Alias for
resetkeys: Flush the list of allowed keys patterns. For instance the ACL
~foo:* ~bar:* resetkeys ~objects:*, will only allow the client to access keys that match the pattern
Allow and disallow Pub/Sub channels:
&<pattern>: (Available in Redis 6.2 and later) Add a glob style pattern of Pub/Sub channels that can be accessed by the user. It is possible to specify multiple channel patterns. Note that pattern matching is done only for channels mentioned by
PSUBSCRIBErequires a literal match between its channel patterns and those allowed for user.
allchannels: Alias for
&*that allows the user to access all Pub/Sub channels.
resetchannels: Flush the list of allowed channel patterns and disconnect the user's Pub/Sub clients if these are no longer able to access their respective channels and/or channel patterns.
Configure valid passwords for the user:
><password>: Add this password to the list of valid passwords for the user. For example
>mypasswill add "mypass" to the list of valid passwords. This directive clears the nopass flag (see later). Every user can have any number of passwords.
<<password>: Remove this password from the list of valid passwords. Emits an error in case the password you are trying to remove is actually not set.
#<hash>: Add this SHA-256 hash value to the list of valid passwords for the user. This hash value will be compared to the hash of a password entered for an ACL user. This allows users to store hashes in the
acl.conffile rather than storing cleartext passwords. Only SHA-256 hash values are accepted as the password hash must be 64 characters and only contain lowercase hexadecimal characters.
!<hash>: Remove this hash value from the list of valid passwords. This is useful when you do not know the password specified by the hash value but would like to remove the password from the user.
nopass: All the set passwords of the user are removed, and the user is flagged as requiring no password: it means that every password will work against this user. If this directive is used for the default user, every new connection will be immediately authenticated with the default user without any explicit AUTH command required. Note that the resetpass directive will clear this condition.
resetpass: Flushes the list of allowed passwords and removes the nopass status. After resetpass, the user has no associated passwords and there is no way to authenticate without adding some password (or setting it as nopass later).
Note: if a user is not flagged with nopass and has no list of valid passwords, that user is effectively impossible to use because there will be no way to log in as that user.
Configure selectors for the user:
(<rule list>): (Available in Redis 7.0 and later) Create a new selector to match rules against. Selectors are evaluated after the user permissions, and are evaluated according to the order they are defined. If a command matches either the user permissions or any selector, it is allowed. See selectors for more information.
clearselectors: (Available in Redis 7.0 and later) Delete all of the selectors attached to the user.
Reset the user:
resetPerforms the following actions: resetpass, resetkeys, resetchannels, off, -@all. The user returns to the same state it had immediately after its creation.
Users can be created and modified in two main ways:
In this section we'll learn how to define users using the
With such knowledge, it will be trivial to do the same things via the
configuration files. Defining users in the configuration deserves its own
section and will be discussed later separately.
To start, try the simplest
ACL SETUSER command call:
> ACL SETUSER alice OK
ACL SETUSER command takes the username and a list of ACL rules to apply
to the user. However the above example did not specify any rule at all.
This will just create the user if it did not exist, using the defaults for new
users. If the user already exists, the command above will do nothing at all.
Check the default user status:
> ACL LIST 1) "user alice off &* -@all" 2) "user default on nopass ~* ~& +@all"
The new user "alice" is:
AUTHwill not work for the user "alice".
-@allin the output above could be omitted; however,
ACL LISTattempts to be explicit rather than implicit.
New users are created with restrictive permissions by default. Starting with Redis 6.2, ACL provides Pub/Sub channels access management as well. To ensure backward compatibility with version 6.0 when upgrading to Redis 6.2, new users are granted the 'allchannels' permission by default. The default can be set to
resetchannels via the
acl-pubsub-default configuration directive.
From 7.0, The
acl-pubsub-default value is set to
resetchannels to restrict the channels access by default to provide better security.
The default can be set to
allchannels via the
acl-pubsub-default configuration directive to be compatible with previous versions.
Such user is completely useless. Let's try to define the user so that
it is active, has a password, and can access with only the
to key names starting with the string "cached:".
> ACL SETUSER alice on >p1pp0 ~cached:* +get OK
Now the user can do something, but will refuse to do other things:
> AUTH alice p1pp0 OK > GET foo (error) NOPERM this user has no permissions to access one of the keys used as arguments > GET cached:1234 (nil) > SET cached:1234 zap (error) NOPERM this user has no permissions to run the 'set' command
Things are working as expected. In order to inspect the configuration of the
user alice (remember that user names are case sensitive), it is possible to
use an alternative to
ACL LIST which is designed to be more suitable for
computers to read, while
ACL LIST is more human readable.
> ACL GETUSER alice 1) "flags" 2) 1) "on" 2) "allchannels" 3) "passwords" 4) 1) "2d9c75..." 5) "commands" 6) "-@all +get" 7) "keys" 8) "~cached:*" 9) "channels" 10) "&*" 11) "selectors" 12) 1) 1) "commands" 2) "-@all +set" 3) "keys" 4) "~*" 5) "channels" 6) "&*"
ACL GETUSER returns a field-value array that describes the user in more parsable terms. The output includes the set of flags, a list of key patterns, passwords, and so forth. The output is probably more readable if we use RESP3, so that it is returned as a map reply:
> ACL GETUSER alice 1# "flags" => 1~ "on" 2~ "allchannels" 2# "passwords" => 1) "2d9c75273d72b32df726fb545c8a4edc719f0a95a6fd993950b10c474ad9c927" 3# "commands" => "-@all +get" 4# "keys" => "~cached:*" 5# "channels" => "&*" 6# "selectors" => 1) 1# "commands" => "-@all +set" 2# "keys" => "~*" 3# "channels" => "&*"
Note: from now on, we'll continue using the Redis default protocol, version 2
> ACL SETUSER alice ~objects:* ~items:* ~public:* OK > ACL LIST 1) "user alice on >2d9c75... ~cached:* ~objects:* ~items:* ~public:* &* -@all +get" 2) "user default on nopass ~* &* +@all"
The user representation in memory is now as we expect it to be.
It is very important to understand what happens when
ACL SETUSER is called
multiple times. What is critical to know is that every
ACL SETUSER call will
NOT reset the user, but will just apply the ACL rules to the existing user.
The user is reset only if it was not known before. In that case, a brand new
user is created with zeroed-ACLs. The user cannot do anything, is
disallowed, has no passwords, and so forth. This is the best default for safety.
However later calls will just modify the user incrementally. For instance, the following sequence:
> ACL SETUSER myuser +set OK > ACL SETUSER myuser +get OK
> ACL LIST 1) "user default on nopass ~* &* +@all" 2) "user myuser off &* -@all +set +get"
Setting user ACLs by specifying all the commands one after the other is really annoying, so instead we do things like this:
> ACL SETUSER antirez on +@all -@dangerous >42a979... ~*
By saying +@all and -@dangerous, we included all the commands and later removed
all the commands that are tagged as dangerous inside the Redis command table.
Note that command categories never include modules commands with
the exception of +@all. If you say +@all, all the commands can be executed by
the user, even future commands loaded via the modules system. However if you
use the ACL rule +@read or any other, the modules commands are always
excluded. This is very important because you should just trust the Redis
internal command table. Modules may expose dangerous things and in
the case of an ACL that is just additive, that is, in the form of
You should be absolutely sure that you'll never include what you did not mean
The following is a list of command categories and their meanings:
FLUSHALL, etc. Commands that may modify the keyspace, key, or metadata will also have the
writecategory. Commands that only read the keyspace, key, or metadata will have the
Redis can also show you a list of all categories and the exact commands each category includes using the Redis
CAT subcommand. It can be used in two forms:
ACL CAT -- Will just list all the categories available ACL CAT <category-name> -- Will list all the commands inside the category
> ACL CAT 1) "keyspace" 2) "read" 3) "write" 4) "set" 5) "sortedset" 6) "list" 7) "hash" 8) "string" 9) "bitmap" 10) "hyperloglog" 11) "geo" 12) "stream" 13) "pubsub" 14) "admin" 15) "fast" 16) "slow" 17) "blocking" 18) "dangerous" 19) "connection" 20) "transaction" 21) "scripting"
As you can see, so far there are 21 distinct categories. Now let's check what command is part of the geo category:
> ACL CAT geo 1) "geohash" 2) "georadius_ro" 3) "georadiusbymember" 4) "geopos" 5) "geoadd" 6) "georadiusbymember_ro" 7) "geodist" 8) "georadius"
Note that commands may be part of multiple categories. For example, an
ACL rule like
+@geo -@read will result in certain geo commands to be
excluded because they are read-only commands.
Starting from Redis 7.0, subcommands can be allowed/blocked just like other
commands (by using the separator
| between the command and subcommand, for
That is true for all commands except DEBUG. In order to allow/block specific DEBUG subcommands, see the next section.
Note: This feature is deprecated since Redis 7.0 and may be removed in the future.
Sometimes the ability to exclude or include a command or a subcommand as a whole is not enough.
Many deployments may not be happy providing the ability to execute a
SELECT for any DB, but may
still want to be able to run
In such case we could alter the ACL of a user in the following way:
ACL SETUSER myuser -select +select|0
First, remove the
SELECT command and then add the allowed
first-arg. Note that it is not possible to do the reverse since first-args
can be only added, not excluded. It is safer to specify all the first-args
that are valid for some user since it is possible that
new first-args may be added in the future.
ACL SETUSER myuser -debug +debug|digest
Note that first-arg matching may add some performance penalty; however, it is hard to measure even with synthetic benchmarks. The additional CPU cost is only paid when such commands are called, and not when other commands are called.
It is possible to use this mechanism in order to allow subcommands in Redis versions prior to 7.0 (see above section).
In the previous section, it was observed how it is possible to define command ACLs based on adding/removing single commands.
Starting with Redis 7.0, Redis supports adding multiple sets of rules that are evaluated independently of each other. These secondary sets of permissions are called selectors and added by wrapping a set of rules within parentheses. In order to execute a command, either the root permissions (rules defined outside of parenthesis) or any of the selectors (rules defined inside parenthesis) must match the given command. Internally, the root permissions are checked first followed by selectors in the order they were added.
For example, consider a user with the ACL rules
+GET ~key1 (+SET ~key2).
This user is able to execute
GET key1 and
SET key2 hello, but not
GET key2 or
SET key1 world.
Unlike the user's root permissions, selectors cannot be modified after they are added.
Instead, selectors can be removed with the
clearselectors keyword, which removes all of the added selectors.
clearselectors does not remove the root permissions.
Starting with Redis 7.0, key patterns can also be used to define how a command is able to touch a key.
This is achieved through rules that define key permissions.
The key permission rules take the form of
Permissions are defined as individual characters that map to the following key permissions:
STRLEN), type information (example
TYPE) or information about whether a value exists within a collection (example
Permissions can be composed together by specifying multiple characters.
Specifying the permission as 'RW' is considered full access and is analogous to just passing in
For a concrete example, consider a user with ACL rules
+@all ~app1:* (+@readonly ~app2:*).
This user has full access on
app1:* and readonly access on
However, some commands support reading data from one key, doing some transformation, and storing it into another key.
One such command is the
COPY command, which copies the data from the source key into the destination key.
The example set of ACL rules is unable to handle a request copying data from
app1:user, since neither the root permission or the selector fully matches the command.
However, using key selectors you can define a set of ACL rules that can handle this request
+@all ~app1:* %R~app2:*.
The first pattern is able to match
app1:user and the second pattern is able to match
Which type of permission is required for a command is documented through key specifications.
The type of permission is based off the keys logical operation flags.
The insert, update, and delete flags map to the write key permission.
The access flag maps to the read key permission.
If the key has no logical operation flags, such as
EXISTS, the user still needs either key read or key write permissions to execute the command.
Note: Side channels to accessing user data are ignored when it comes to evaluating whether read permissions are required to execute a command. This means that some write commands that return metadata about the modified key only require write permission on the key to execute: For example, consider the following two commands:
LPUSH key1 data: modifies "key1" but only returns metadata about it, the size of the list after the push, so the command only requires write permission on "key1" to execute.
LPOP key2: modifies "key2" but also returns data from it, the left most item in the list, so the command requires both read and write permission on "key2" to execute.
If an application needs to make sure no data is accessed from a key, including side channels, it's recommended to not provide any access to the key.
Redis internally stores passwords hashed with SHA256. If you set a password
and check the output of
ACL LIST or
ACL GETUSER, you'll see a long hex
string that looks pseudo random. Here is an example, because in the previous
examples, for the sake of brevity, the long hex string was trimmed:
> ACL GETUSER default 1) "flags" 2) 1) "on" 2) "allkeys" 3) "allcommands" 4) "allchannels" 3) "passwords" 4) 1) "2d9c75273d72b32df726fb545c8a4edc719f0a95a6fd993950b10c474ad9c927" 5) "commands" 6) "+@all" 7) "keys" 8) "~*" 9) "channels" 10) "&*" 11) "selectors" 12) (empty array)
Also, starting with Redis 6, the old command
CONFIG GET requirepass will
no longer return the clear text password, but instead the hashed password.
Using SHA256 provides the ability to avoid storing the password in clear text
while still allowing for a very fast
AUTH command, which is a very important
feature of Redis and is coherent with what clients expect from Redis.
However ACL passwords are not really passwords. They are shared secrets between the server and the client, because the password is not an authentication token used by a human being. For instance:
For this reason, slowing down the password authentication, in order to use an
algorithm that uses time and space to make password cracking hard,
is a very poor choice. What we suggest instead is to generate strong
passwords, so that nobody will be able to crack it using a
dictionary or a brute force attack even if they have the hash. To do so, there is a special ACL
ACL GENPASS that generates passwords using the system cryptographic pseudorandom
> ACL GENPASS "dd721260bfe1b3d9601e7fbab36de6d04e2e67b0ef1c53de59d45950db0dd3cc"
The command outputs a 32-byte (256-bit) pseudorandom string converted to a 64-byte alphanumerical string. This is long enough to avoid attacks and short enough to be easy to manage, cut & paste, store, and so forth. This is what you should use in order to generate Redis passwords.
There are two ways to store users inside the Redis configuration:
The two methods are mutually incompatible, so Redis will ask you to use one
or the other. Specifying users inside
good for simple use cases. When there are multiple users to define, in a
complex environment, we recommend you use the ACL file instead.
The format used inside
redis.conf and in the external ACL file is exactly
the same, so it is trivial to switch from one to the other, and is
user <username> ... acl rules ...
user worker +@list +@connection ~jobs:* on >ffa9203c493aa99
When you want to use an external ACL file, you are required to specify
the configuration directive called
aclfile, like this:
When you are just specifying a few users directly inside the
file, you can use
CONFIG REWRITE in order to store the new user configuration
inside the file by rewriting it.
The external ACL file however is more powerful. You can do the following:
ACL LOADif you modified the ACL file manually and you want Redis to reload the new configuration. Note that this command is able to load the file only if all the users are correctly specified. Otherwise, an error is reported to the user, and the old configuration will remain valid.
ACL SAVEto save the current ACL configuration to the ACL file.
In case you don't want to provide Redis replicas and Redis Sentinel instances full access to your Redis instances, the following is the set of commands that must be allowed in order for everything to work correctly.
For Sentinel, allow the user to access the following commands both in the master and replica instances:
Sentinel does not need to access any key in the database but does use Pub/Sub, so the ACL rule would be the following (note:
AUTH is not needed since it is always allowed):
ACL SETUSER sentinel-user on >somepassword allchannels +multi +slaveof +ping +exec +subscribe +config|rewrite +role +publish +info +client|setname +client|kill +script|kill
Redis replicas require the following commands to be allowed on the master instance:
No keys need to be accessed, so this translates to the following rules:
ACL setuser replica-user on >somepassword +psync +replconf +ping
Note that you don't need to configure the replicas to allow the master to be able to execute any set of commands. The master is always authenticated as the root user from the point of view of replicas.