Prepare SQL Server for RDI

Prepare SQL Server databases to work with RDI

To prepare your SQL Server database for Debezium, you must first create a dedicated Debezium user, run a script to enable CDC globally, and then separately enable CDC for each table you want to capture. You need administrator privileges to do this.

Once you enable CDC, it captures all of the INSERT, UPDATE, and DELETE operations on your chosen tables. The Debezium connector can then emit these events to RDI.

1. Create a Debezium user

It is strongly recommended to create a dedicated Debezium user for the connection between RDI and the source database. When using an existing user, ensure that the required permissions are granted and that the user is added to the CDC role.

  1. Create a user with the Transact-SQL below:

    USE master
    GO
    CREATE LOGIN MyUser WITH PASSWORD = 'My_Password'
    GO
    USE MyDB
    GO
    CREATE USER MyUser FOR LOGIN MyUser
    GO
    

    Replace MyUser, My_Password and MyDB with your chosen values.

  2. Grant required permissions:

    USE master
    GO
    GRANT VIEW SERVER STATE TO MyUser
    GO
    USE MyDB
    GO
    EXEC sp_addrolemember N'db_datareader', N'MyUser'
    GO
    

2. Enable CDC on the database

There are two system stored procedures to enable CDC (you need administrator privileges to run these). Use sys.sp_cdc_enable_db to enable CDC for the whole database and then sys.sp_cdc_enable_table to enable CDC for individual tables.

Before running the procedures, ensure that:

  • You are a member of the sysadmin fixed server role for the SQL Server.
  • You are a db_owner of the database.
  • The SQL Server Agent is running.

Then, assuming your database is called MyDB, run the script below to enable CDC:

USE MyDB
GO
EXEC sys.sp_cdc_enable_db
GO
Note:

For SQL Server on AWS RDS, you must use a different stored procedure:

EXEC msdb.dbo.rds_cdc_enable_db 'Chinook'
GO

When you enable CDC for the database, it creates a schema called cdc and also a CDC user, metadata tables, and other system objects.

3. Enable CDC for the tables you want to capture

  1. You must also enable CDC on the tables you want Debezium to capture using the following commands (again, you need administrator privileges for this):

    USE MyDB
    GO
    
    EXEC sys.sp_cdc_enable_table
    @source_schema = N'dbo',
    @source_name   = N'MyTable', 
    @role_name     = N'MyRole',  
    @supports_net_changes = 0
    GO
    

    Repeat this for every table you want to capture.

    Note:
    The value for @role_name can’t be a fixed database role, such as db_datareader. Specifying a new name will create a corresponding database role that has full access to the captured change data.
  2. Add the Debezium user to the CDC role:

    USE MyDB
    GO
    EXEC sp_addrolemember N'MyRole', N'MyUser'
    GO
    

4. Check that you have access to the CDC table

You can use another stored procedure sys.sp_cdc_help_change_data_capture to query the CDC information for the database and check you have enabled it correctly. To do this, connect as the Debezium user you created previously (MyUser).

  1. Run the sys.sp_cdc_help_change_data_capture stored procedure to query the CDC configuration. For example, if your database was called MyDB then you would run the following:

    USE MyDB;
    GO
    EXEC sys.sp_cdc_help_change_data_capture
    GO
    
  2. The query returns configuration information for each table in the database that has CDC enabled and that contains change data that you are authorized to access. If the result is empty then you should check that you have privileges to access both the capture instance and the CDC tables.

Troubleshooting

If no CDC is happening then it might mean that SQL Server Agent is down. You can check for this using the SQL query shown below:

IF EXISTS (SELECT 1 
           FROM master.dbo.sysprocesses 
           WHERE program_name = N'SQLAgent - Generic Refresher')
BEGIN
  SELECT @@SERVERNAME AS 'InstanceName', 1 AS 'SQLServerAgentRunning'
END
ELSE 
BEGIN
  SELECT @@SERVERNAME AS 'InstanceName', 0 AS 'SQLServerAgentRunning'
END

If the query returns a result of 0, you need to need to start SQL Server Agent using the following commands:

EXEC xp_servicecontrol N'START',N'SQLServerAGENT';
GO

SQL Server capture job agent configuration parameters

In SQL Server, the parameters that control the behavior of the capture job agent are defined in the SQL Server table msdb.dbo.cdc_jobs. If you experience performance problems while running the capture job agent then you can adjust the capture jobs settings to reduce CPU load. To do this, run the sys.sp_cdc_change_job stored procedure with your new parameter values.

Note:
A full guide to configuring the SQL Server capture job agent parameters is outside the scope of the Redis documentation.

The following parameters are the most important ones for modifying the capture agent behavior of the Debezium SQL Server connector:

  • pollinginterval: This specifies the number of seconds that the capture agent waits between log scan cycles. A higher value reduces the load on the database host, but increases latency. A value of 0 specifies no wait between scans. The default value is 5.
  • maxtrans: This specifies the maximum number of transactions to process during each log scan cycle. After the capture job processes the specified number of transactions, it pauses for the length of time that pollinginterval specifies before the next scan begins. A lower value reduces the load on the database host, but increases latency. The default value is 500.
  • maxscans: This specifies a limit on the number of scan cycles that the capture job can attempt when capturing the full contents of the database transaction log. If the continuous parameter is set to 1, the job pauses for the length of time that the pollinginterval specifies before it resumes scanning. A lower values reduces the load on the database host, but increases latency. The default value is 10.

See the SQL Server documentation for more information about capture agent parameters.

SQL Server on Azure

You can also use the Debezium SQL Server connector with SQL Server on Azure. See Microsoft's guide to configuring SQL Server on Azure for CDC with Debezium for more information.

Handling changes to the schema

RDI can't adapt automatically when you change the schema of a CDC table in SQL Server. For example, if you add a new column to a table you are capturing then RDI will generate errors instead of capturing the changes correctly. See Debezium's SQL Server schema evolution docs for more information.

If you have administrator privileges, you can follow the steps below to update RDI after a schema change and resume CDC. See the online schema updates documentation for further details.

  1. Make your changes to the source table schema.

  2. Create a new capture table for the updated source table by running the sys.sp_cdc_enable_table stored procedure with a new, unique value for the parameter @capture_instance. For example, if the old value was dbo_MyTable, you could replace it with dbo_MyTable_v2 (you can see the existing values by running stored procedure sys.sp_cdc_help_change_data_capture):

    EXEC sys.sp_cdc_enable_table
    @source_schema    = N'dbo',
    @source_name      = N'MyTable',
    @role_name        = N'MyRole',
    @capture_instance = N'dbo_MyTable_v2',
    @supports_net_changes = 0
    GO
    
  3. When Debezium starts streaming from the new capture table, drop the old capture table by running the sys.sp_cdc_disable_table stored procedure with the parameter @capture_instance set to the old capture instance name, dbo_MyTable:

    EXEC sys.sp_cdc_disable_table
    @source_schema    = N'dbo',
    @source_name      = N'MyTable',
    @capture_instance = N'dbo_MyTable'
    GO
    
Note:
RDI will not correctly capture changes that happen in the time gap between changing the source schema (step 1 above) and updating the value of @capture_instance (step 2). Try to keep the gap as short as possible or perform the update at a time when you expect few changes to the data.
RATE THIS PAGE
Back to top ↑